TAQA has developed the FracRight system, a comprehensive solution for selective multi-zone stimulation in open or closed-hole applications. FracRight coalesces multiple field proven technologies in one high quality system. This drop-ball activated fracturing system enables the installation of multiple sleeves, so that each zone can be stimulated simultaneously to maximize production. Sleeves are opened by pumping a ball from the surface to allow for the stimulation of a selected zone. This system helps operators ensure stimulation jobs are cost-effective by fracturing the maximum number of zones in a single trip.
- About TAQA
- What we do
- Sustainability
FracRight
FracRight
FracRight Plug
TAQA’s FracRight range of composite frac plugs are rated to 10,000psi at 375°F, and are available in a full range of sizes. Comprised of proprietary high temperature composites and polyamides, and having minimal metallic content, FracRight plugs can be milled quickly and easily.
FracRight DHP Packer
Used to deploy the multi-stage system, the TAQA FracRight DHP packer combines the liner hanger and packer into one component in order to reduce operator completion costs. The hydraulic-set permanent packer comes with an anti-pre-set feature that prevents premature pack-off during running in hole. With a working pressure of 10,000psi, 350,000lbs load capacity and a range of receptacle lengths available, the FracRight DHP is designed specifically for highly deviated wells.
FracRight Toe Sleeve
The FracRight Toe Sleeve is a frac initiation sleeve designed for the toe area of the horizontal wells. It has a high pressure rating allowing the operator to test the casing annulus, then increase pressure to hydraulically open the launch. The tool can then be the first stage of the frac job through the large ports.
FracRight Multi Sleeve
The FracRight Multi sleeve greatly increases the number of fracturing stages available and reduces overall completion time.
Using TAQA’s unique nozzle technology, between three and five sleeves can be operated, with a single ball opening each stage ready for stimulation. Each series of sleeves is configured with specifically sized nozzles to evenly distribute surface pump pressure across each of them.
With over 60 stages available for stimulation, operators can extend both the lateral length and stages in each well, whilst maintaining stimulation control of each zone.
FracRight Solo Sleeve
The FracRight Solo sleeve has been designed to meet the high demands of today’s advanced fracturing and stimulation applications. As part of the FracRight multi-stage fracturing system, each sleeve is opened in sequence by circulating a ball down to the integral ball seat and applying a pressure differential to shear that sleeve into a locked open position – the ball is then held on the seat during stimulation to protect lower zones from overburden.
- What we do